HOW TO HACK AN ELECTRIC METRE ( PHCN )

HOW TO HACK AN ELECTRIC METRE ( PHCN )

Hello Everyone ! good evening,
Due to the fact that
most people have been
encountering Error with my
Previous Post on how to Hack
The Prepaid Electric Metre. I'm back with a more
new simpler techniques
called " UB " ( Unit Bypassing )
So this time around i
shall highlight every member of
our cartel on steps on how to Bypass the Metre connection
( as in even
though your prepaid recharge is
exhausted- the
light wont go off rather it will
continue ON With "0 0" account N.B: That This New Re-brand
Tutorial has Been
Tested & Working for all Metre
in Nigeria. So Our Accuracy is
given as 100%. -,-<ITEMS NEEDED>---
1)A screw Driver & Plier
2)safety gloves &- boots
3)Any Solid Metallic Wire STEP 1: Put On Your Safety
Gloves & Boot then switch
the Metre OFF from the switch
at the right corner -
Now Unscrew the nuts from the
Front Case Cover and keep safely. STEP 2: Now You'll see the
arrangement of the metre "
counter device with buttons "-
Now look carefully at
the TOP & BOTTOM of the
Counter Device and you will see some " Blueish-Plastic/
attachment " Just Pull
them UP/DOWN ( that is->You
should try to remove
the Metre Device "PULLING IT
" ) STEP 3: Now after successfully
pulling it Out. TAKE
NOTE:- Look at The Back of the
Metre, You'll see "TWO
PAIR of FUSE ( 4 plugs )". Now
Follow Next Step==> STEP 4: Now Bring out your "
Metallic Wire " ( it should
be the solid/strong type NOT
the one with strands of
wire combined E.g <http://
tinyurl.com/wire- sample> ) Now attach / Use the Wire to
join the first pair of plug at the
Back of the Counter Device and
push it to the end of the plug
( that is--> the wire
should be tied NOT at the top/ base of the plug BUT at
the bottom of it- near the
plastic case )plz note that
the wire must be tied at the
first Pair of Plugs NOT the
second pair. STEP 5: Now Push/put the
Counter Device Back from
Where You pulled it then Cover
the metre Back and
Screw back into Place- Now
Your New "UB" HACKED metre is Ready, Buy 500
recharge and use for
Forever [ But avoid overloading/
appliances
connections ]

 NOTE: THIS TUTORIAL IS POSTED
BASE ON ALL METRE
CONFIGURATION- SO DONT OR
ASK UN-RELEVANT
QUESTION, WISHING YOU ALL A
HAPPY INTERCEPTING